ABOUT PolyCSAM<\/a> | VALUE PROPOSITION<\/a>\u00a0 |\u00a0 CSAM PROCESS ADVANTAGES<\/a>\u00a0 |\u00a0 SEVERAL AVAILABLE MATERIALS<\/a>\u00a0 |\u00a0 PHOTO GALLERY<\/a><\/h5>\n<\/div><\/div><\/div><\/div><\/div>PolyCSAM<\/h1><\/h1><\/div><\/div>We Boost Cold Spray Additive Manufacturing Into Full-Scale Production!<\/h2><\/h2><\/div><\/div><\/div><\/div><\/div><\/div><\/div>About PolyCSAM<\/h2>\n
Polycontrols Technologies, Inc. is a corporation with over 40 years of experience in instrumentation, calibration, and the development & implementation of manufacturing solutions. In collaboration with the National Research Council of Canada-NRC, we have created PolyCSAM with the objective of improving accessibility of cold spray additive manufacturing for our industrial clients. By de-risking the development and the adoption of the technology, we help them become more competitive globally.<\/p>\n
PolyCSAM is a world-class, cold spray, hybrid additive manufacturing demonstrator facility integrating advanced surface preparation techniques, material deposition, in-situ robotic machining & surface finishing, heat treatment, and data analytics\/machine learning-based process control. Designed and operated in an industry 4.0 spirit, PolyCSAM offers a fully digital manufacturing environment and allows for the manufacturing & repair of parts and assemblies with sizes ranging from a few cm to several meters in length, and weight ranging from a few Kg to hundreds of Kg.<\/p>\n<\/div>
![](\"https:\/\/polycontrols.com\/wp-content\/uploads\/2023\/04\/pastille-as9100d.png\")
<\/a><\/span><\/div><\/div><\/div><\/div><\/a>Connect with us on LinkedIn<\/p>\n<\/div>
<\/i>REQUEST FOR QUOTE<\/span><\/a><\/div><\/div>PolyCSAM<\/a><\/h5>\n\n- \n
Integration & Robotics<\/a><\/h5>\n<\/li>\n- \n
Powder Feeders for CS | SPS<\/a><\/h5>\n<\/li>\n- \n
Helium | N2 Gas Mixer for CS<\/a><\/h5>\n<\/li>\n- \n
Argon Recovery and Recirculation<\/a><\/h5>\n<\/li>\n- \n
Switch Over Tool Changer<\/a><\/h5>\n<\/li>\n- \n
Controllers for Cold Spray<\/a><\/h5>\n<\/li>\n- \n
Compressor for Cold Spray<\/a><\/h5>\n<\/li>\n<\/ul>\n<\/div><\/i>(450) 641-5546<\/span><\/a><\/div><\/div><\/div><\/div><\/div><\/div>The Value Proposition<\/h3><\/h3><\/div>\nPolyCSAM is a unique technology platform that closes the gap between the lab & a full-scale manufacturing environment by:<\/p>\n
\n- De-risking the development & validation phase for its clients<\/li>\n
- Reducing the time-to-deployment and time-to-market of the solutions developed<\/li>\n
- Allowing the fabrication of full-scale prototypes & components for validation, certification, and \/ or demonstration purposes<\/li>\n
- Allowing the manufacture or repair of large structural components through the synergetic use of multiple cutting-edge technologies<\/li>\n
- Offering advanced personnel training<\/li>\n
- Offering production backup\/overload services<\/li>\n<\/ul>\n
NRC\u2019s reputation in the relevant areas of cold spray, robotic machining, artificial intelligence and advanced materials is well established. This vast expertise, combined with Polycontrols\u2019 reputation and concrete achievements in the field of thermal\/cold spray and robotics represents a major asset for manufacturers who automatically get access to a pool of more than 60 experts in the field.<\/p>\n<\/div>\n<\/div><\/div><\/div>
![\"PolyCSAM](\"https:\/\/polycontrols.com\/wp-content\/uploads\/2020\/10\/polycsam-logo-2.png\" "\\"PolyCSAM")
<\/span><\/div><\/div><\/lite-youtube><\/div><\/div><\/div><\/div><\/div><\/div>Leadership at PolyCSAM<\/h2><\/h2><\/div>![\"Luc](\"https:\/\/polycontrols.com\/wp-content\/uploads\/2020\/10\/Polycontrols-Luc-Pouliot-1.jpg\" "\\"Luc")
<\/span><\/div><\/div><\/a>LUC POULIOT<\/strong><\/a>, <\/span><\/span>Eng. M.Sc.A. FASM<\/span><\/span>
\nDirector \u2013 PolyCSAM
\nCEO | Co-Owner | Polycontrols
\nTel.: (450) 444-3600<\/a> x312 | M. (514) 865-5763<\/a>
\nluc.pouliot@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div>![\"Dr.](\"https:\/\/polycontrols.com\/wp-content\/uploads\/2020\/10\/dr-eric-irissou.jpg\" "\\"Dr.")
<\/span><\/div><\/div>\u00c9RIC IRISSOU<\/strong>, Ph.D.
\nTeam Leader, Thermal Spray
\nNational Research Council Canada
\nTel.: (438) 992-8903<\/a>
\neric.irissou@nrc-cnrc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div>![\"Mme.](\"https:\/\/polycontrols.com\/wp-content\/uploads\/2020\/10\/mme-fernanda-caio.jpg\" "\\"Mme.")
<\/span><\/div><\/div><\/a>FERNANDA CAIO<\/b><\/a>, Eng. M.Sc.
\nOperations Manager \u2013 PolyCSAM
\nPolycontrols Technologies Inc.
\nTel.: (438) 398-4758<\/a>
\nfernanda.caio@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div>![\"Dr.](\"https:\/\/polycontrols.com\/wp-content\/uploads\/2020\/10\/dr-manuel-martin.jpg\" "\\"Dr.")
<\/span><\/div><\/div>MANUEL MARTIN<\/strong>, Ph.D.
\nTechnical Leader-Additive Manufacturing
\nfor Mass Customization
\nNational Research Council Canada
\nTel.: (450) 641-5356<\/a>
\nmanuel.martin@nrc-crnc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div>![\"Sylvain](\"https:\/\/polycontrols.com\/wp-content\/uploads\/2020\/10\/400-Polycontrols-Sylvain-Desaulniers.jpeg\" "\\"Sylvain")
<\/span><\/div><\/div><\/a>SYLVAIN DESAULNIERS<\/strong><\/a>, Eng., MBA
\n<\/span>President & CFO | Co-Owner
\nPolycontrols Technologies Inc.
\nTel.: (450) 444-3600<\/a> x301\u00a0 <\/span>|\u00a0 <\/span>M. (514) 895-4461<\/a>
\nsylvain.desaulniers@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div>![\"Dr.](\"https:\/\/polycontrols.com\/wp-content\/uploads\/2020\/10\/dr-jorg-oberste-berghaus.jpg\" "\\"Dr.")
<\/span><\/div><\/div>JORG-OBERSTRE-BERGHAUS<\/b>, Ph.D.
\n<\/span>Senior Research Officer & Technical Leader
\nNational Research Council Canada
\nTel.: (514) 794-5893<\/a>
\nJorg.oberste-berghaus@nrc-cnrc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>CSAM Process Advantages<\/h3><\/h3><\/div>\nThe Cold Spray Additive Manufacturing process has several advantages over other 3D printing techniques:<\/p>\n
\n- No part size restrictions<\/li>\n
- No HAZ (Heat Affected Zone), so no damage to substrate or part<\/li>\n
- Multi-materials capability<\/li>\n
- Can be fully robotized<\/li>\n
- Batch production: from rapid prototyping to cost-effective manufacturing.<\/li>\n
- High deposit rate (several kg\/h)<\/li>\n
- Build on existing parts<\/li>\n
- Customization of components produced by traditional\/Mass production methods<\/li>\n
- Easily combined with conventional techniques such as machining & forging<\/li>\n
- Promoting a circular economy thanks to a Sustainable Process<\/li>\n<\/ul>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div><\/div>
Several Available Materials<\/h3><\/h3><\/div>\n\n\nAt PolyCSAM, we currently spray the following materials:<\/p>\n
\n- Al & alloys<\/li>\n
- Ti & alloys<\/li>\n
- Cu & alloys<\/li>\n
- Ni<\/span><\/li>\n
- Carbon steel<\/li>\n
- Tools steel<\/li>\n
- Stainless steel<\/li>\n<\/ul>\n<\/div>\n<\/section>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div>
PolyCSAM<\/h1><\/h1><\/div><\/div>We Boost Cold Spray Additive Manufacturing Into Full-Scale Production!<\/h2><\/h2><\/div><\/div><\/div><\/div><\/div><\/div><\/div>About PolyCSAM<\/h2>\n
Polycontrols Technologies, Inc. is a corporation with over 40 years of experience in instrumentation, calibration, and the development & implementation of manufacturing solutions. In collaboration with the National Research Council of Canada-NRC, we have created PolyCSAM with the objective of improving accessibility of cold spray additive manufacturing for our industrial clients. By de-risking the development and the adoption of the technology, we help them become more competitive globally.<\/p>\n
PolyCSAM is a world-class, cold spray, hybrid additive manufacturing demonstrator facility integrating advanced surface preparation techniques, material deposition, in-situ robotic machining & surface finishing, heat treatment, and data analytics\/machine learning-based process control. Designed and operated in an industry 4.0 spirit, PolyCSAM offers a fully digital manufacturing environment and allows for the manufacturing & repair of parts and assemblies with sizes ranging from a few cm to several meters in length, and weight ranging from a few Kg to hundreds of Kg.<\/p>\n<\/div>
<\/a><\/span><\/div><\/div><\/div><\/div><\/a>Connect with us on LinkedIn<\/p>\n<\/div>
<\/i>REQUEST FOR QUOTE<\/span><\/a><\/div><\/div>PolyCSAM<\/a><\/h5>\n\n- \n
Integration & Robotics<\/a><\/h5>\n<\/li>\n- \n
Powder Feeders for CS | SPS<\/a><\/h5>\n<\/li>\n- \n
Helium | N2 Gas Mixer for CS<\/a><\/h5>\n<\/li>\n- \n
Argon Recovery and Recirculation<\/a><\/h5>\n<\/li>\n- \n
Switch Over Tool Changer<\/a><\/h5>\n<\/li>\n- \n
Controllers for Cold Spray<\/a><\/h5>\n<\/li>\n- \n
Compressor for Cold Spray<\/a><\/h5>\n<\/li>\n<\/ul>\n<\/div><\/i>(450) 641-5546<\/span><\/a><\/div><\/div><\/div><\/div><\/div><\/div>The Value Proposition<\/h3><\/h3><\/div>\nPolyCSAM is a unique technology platform that closes the gap between the lab & a full-scale manufacturing environment by:<\/p>\n
\n- De-risking the development & validation phase for its clients<\/li>\n
- Reducing the time-to-deployment and time-to-market of the solutions developed<\/li>\n
- Allowing the fabrication of full-scale prototypes & components for validation, certification, and \/ or demonstration purposes<\/li>\n
- Allowing the manufacture or repair of large structural components through the synergetic use of multiple cutting-edge technologies<\/li>\n
- Offering advanced personnel training<\/li>\n
- Offering production backup\/overload services<\/li>\n<\/ul>\n
NRC\u2019s reputation in the relevant areas of cold spray, robotic machining, artificial intelligence and advanced materials is well established. This vast expertise, combined with Polycontrols\u2019 reputation and concrete achievements in the field of thermal\/cold spray and robotics represents a major asset for manufacturers who automatically get access to a pool of more than 60 experts in the field.<\/p>\n<\/div>\n<\/div><\/div><\/div>
<\/span><\/div><\/div><\/lite-youtube><\/div><\/div><\/div><\/div><\/div><\/div>Leadership at PolyCSAM<\/h2><\/h2><\/div><\/span><\/div><\/div><\/a>LUC POULIOT<\/strong><\/a>, <\/span><\/span>Eng. M.Sc.A. FASM<\/span><\/span>
\nDirector \u2013 PolyCSAM
\nCEO | Co-Owner | Polycontrols
\nTel.: (450) 444-3600<\/a> x312 | M. (514) 865-5763<\/a>
\nluc.pouliot@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div>\u00c9RIC IRISSOU<\/strong>, Ph.D.
\nTeam Leader, Thermal Spray
\nNational Research Council Canada
\nTel.: (438) 992-8903<\/a>
\neric.irissou@nrc-cnrc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div><\/a>FERNANDA CAIO<\/b><\/a>, Eng. M.Sc.
\nOperations Manager \u2013 PolyCSAM
\nPolycontrols Technologies Inc.
\nTel.: (438) 398-4758<\/a>
\nfernanda.caio@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div>MANUEL MARTIN<\/strong>, Ph.D.
\nTechnical Leader-Additive Manufacturing
\nfor Mass Customization
\nNational Research Council Canada
\nTel.: (450) 641-5356<\/a>
\nmanuel.martin@nrc-crnc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div><\/a>SYLVAIN DESAULNIERS<\/strong><\/a>, Eng., MBA
\n<\/span>President & CFO | Co-Owner
\nPolycontrols Technologies Inc.
\nTel.: (450) 444-3600<\/a> x301\u00a0 <\/span>|\u00a0 <\/span>M. (514) 895-4461<\/a>
\nsylvain.desaulniers@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div>JORG-OBERSTRE-BERGHAUS<\/b>, Ph.D.
\n<\/span>Senior Research Officer & Technical Leader
\nNational Research Council Canada
\nTel.: (514) 794-5893<\/a>
\nJorg.oberste-berghaus@nrc-cnrc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>CSAM Process Advantages<\/h3><\/h3><\/div>\nThe Cold Spray Additive Manufacturing process has several advantages over other 3D printing techniques:<\/p>\n
\n- No part size restrictions<\/li>\n
- No HAZ (Heat Affected Zone), so no damage to substrate or part<\/li>\n
- Multi-materials capability<\/li>\n
- Can be fully robotized<\/li>\n
- Batch production: from rapid prototyping to cost-effective manufacturing.<\/li>\n
- High deposit rate (several kg\/h)<\/li>\n
- Build on existing parts<\/li>\n
- Customization of components produced by traditional\/Mass production methods<\/li>\n
- Easily combined with conventional techniques such as machining & forging<\/li>\n
- Promoting a circular economy thanks to a Sustainable Process<\/li>\n<\/ul>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div><\/div>
Several Available Materials<\/h3><\/h3><\/div>\n\n\nAt PolyCSAM, we currently spray the following materials:<\/p>\n
\n- Al & alloys<\/li>\n
- Ti & alloys<\/li>\n
- Cu & alloys<\/li>\n
- Ni<\/span><\/li>\n
- Carbon steel<\/li>\n
- Tools steel<\/li>\n
- Stainless steel<\/li>\n<\/ul>\n<\/div>\n<\/section>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div>
We Boost Cold Spray Additive Manufacturing Into Full-Scale Production!<\/h2><\/h2><\/div><\/div><\/div><\/div><\/div><\/div><\/div>About PolyCSAM<\/h2>\n
Polycontrols Technologies, Inc. is a corporation with over 40 years of experience in instrumentation, calibration, and the development & implementation of manufacturing solutions. In collaboration with the National Research Council of Canada-NRC, we have created PolyCSAM with the objective of improving accessibility of cold spray additive manufacturing for our industrial clients. By de-risking the development and the adoption of the technology, we help them become more competitive globally.<\/p>\n
PolyCSAM is a world-class, cold spray, hybrid additive manufacturing demonstrator facility integrating advanced surface preparation techniques, material deposition, in-situ robotic machining & surface finishing, heat treatment, and data analytics\/machine learning-based process control. Designed and operated in an industry 4.0 spirit, PolyCSAM offers a fully digital manufacturing environment and allows for the manufacturing & repair of parts and assemblies with sizes ranging from a few cm to several meters in length, and weight ranging from a few Kg to hundreds of Kg.<\/p>\n<\/div>
<\/a><\/span><\/div><\/div><\/div><\/div><\/a>Connect with us on LinkedIn<\/p>\n<\/div>
<\/i>REQUEST FOR QUOTE<\/span><\/a><\/div><\/div>PolyCSAM<\/a><\/h5>\n\n- \n
Integration & Robotics<\/a><\/h5>\n<\/li>\n- \n
Powder Feeders for CS | SPS<\/a><\/h5>\n<\/li>\n- \n
Helium | N2 Gas Mixer for CS<\/a><\/h5>\n<\/li>\n- \n
Argon Recovery and Recirculation<\/a><\/h5>\n<\/li>\n- \n
Switch Over Tool Changer<\/a><\/h5>\n<\/li>\n- \n
Controllers for Cold Spray<\/a><\/h5>\n<\/li>\n- \n
Compressor for Cold Spray<\/a><\/h5>\n<\/li>\n<\/ul>\n<\/div><\/i>(450) 641-5546<\/span><\/a><\/div><\/div><\/div><\/div><\/div><\/div>The Value Proposition<\/h3><\/h3><\/div>\nPolyCSAM is a unique technology platform that closes the gap between the lab & a full-scale manufacturing environment by:<\/p>\n
\n- De-risking the development & validation phase for its clients<\/li>\n
- Reducing the time-to-deployment and time-to-market of the solutions developed<\/li>\n
- Allowing the fabrication of full-scale prototypes & components for validation, certification, and \/ or demonstration purposes<\/li>\n
- Allowing the manufacture or repair of large structural components through the synergetic use of multiple cutting-edge technologies<\/li>\n
- Offering advanced personnel training<\/li>\n
- Offering production backup\/overload services<\/li>\n<\/ul>\n
NRC\u2019s reputation in the relevant areas of cold spray, robotic machining, artificial intelligence and advanced materials is well established. This vast expertise, combined with Polycontrols\u2019 reputation and concrete achievements in the field of thermal\/cold spray and robotics represents a major asset for manufacturers who automatically get access to a pool of more than 60 experts in the field.<\/p>\n<\/div>\n<\/div><\/div><\/div>
<\/span><\/div><\/div><\/lite-youtube><\/div><\/div><\/div><\/div><\/div><\/div>Leadership at PolyCSAM<\/h2><\/h2><\/div><\/span><\/div><\/div><\/a>LUC POULIOT<\/strong><\/a>, <\/span><\/span>Eng. M.Sc.A. FASM<\/span><\/span>
\nDirector \u2013 PolyCSAM
\nCEO | Co-Owner | Polycontrols
\nTel.: (450) 444-3600<\/a> x312 | M. (514) 865-5763<\/a>
\nluc.pouliot@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div>\u00c9RIC IRISSOU<\/strong>, Ph.D.
\nTeam Leader, Thermal Spray
\nNational Research Council Canada
\nTel.: (438) 992-8903<\/a>
\neric.irissou@nrc-cnrc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div><\/a>FERNANDA CAIO<\/b><\/a>, Eng. M.Sc.
\nOperations Manager \u2013 PolyCSAM
\nPolycontrols Technologies Inc.
\nTel.: (438) 398-4758<\/a>
\nfernanda.caio@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div>MANUEL MARTIN<\/strong>, Ph.D.
\nTechnical Leader-Additive Manufacturing
\nfor Mass Customization
\nNational Research Council Canada
\nTel.: (450) 641-5356<\/a>
\nmanuel.martin@nrc-crnc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div><\/a>SYLVAIN DESAULNIERS<\/strong><\/a>, Eng., MBA
\n<\/span>President & CFO | Co-Owner
\nPolycontrols Technologies Inc.
\nTel.: (450) 444-3600<\/a> x301\u00a0 <\/span>|\u00a0 <\/span>M. (514) 895-4461<\/a>
\nsylvain.desaulniers@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div>JORG-OBERSTRE-BERGHAUS<\/b>, Ph.D.
\n<\/span>Senior Research Officer & Technical Leader
\nNational Research Council Canada
\nTel.: (514) 794-5893<\/a>
\nJorg.oberste-berghaus@nrc-cnrc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>CSAM Process Advantages<\/h3><\/h3><\/div>\nThe Cold Spray Additive Manufacturing process has several advantages over other 3D printing techniques:<\/p>\n
\n- No part size restrictions<\/li>\n
- No HAZ (Heat Affected Zone), so no damage to substrate or part<\/li>\n
- Multi-materials capability<\/li>\n
- Can be fully robotized<\/li>\n
- Batch production: from rapid prototyping to cost-effective manufacturing.<\/li>\n
- High deposit rate (several kg\/h)<\/li>\n
- Build on existing parts<\/li>\n
- Customization of components produced by traditional\/Mass production methods<\/li>\n
- Easily combined with conventional techniques such as machining & forging<\/li>\n
- Promoting a circular economy thanks to a Sustainable Process<\/li>\n<\/ul>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div><\/div>
Several Available Materials<\/h3><\/h3><\/div>\n\n\nAt PolyCSAM, we currently spray the following materials:<\/p>\n
\n- Al & alloys<\/li>\n
- Ti & alloys<\/li>\n
- Cu & alloys<\/li>\n
- Ni<\/span><\/li>\n
- Carbon steel<\/li>\n
- Tools steel<\/li>\n
- Stainless steel<\/li>\n<\/ul>\n<\/div>\n<\/section>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div>
About PolyCSAM<\/h2>\n
Polycontrols Technologies, Inc. is a corporation with over 40 years of experience in instrumentation, calibration, and the development & implementation of manufacturing solutions. In collaboration with the National Research Council of Canada-NRC, we have created PolyCSAM with the objective of improving accessibility of cold spray additive manufacturing for our industrial clients. By de-risking the development and the adoption of the technology, we help them become more competitive globally.<\/p>\n
PolyCSAM is a world-class, cold spray, hybrid additive manufacturing demonstrator facility integrating advanced surface preparation techniques, material deposition, in-situ robotic machining & surface finishing, heat treatment, and data analytics\/machine learning-based process control. Designed and operated in an industry 4.0 spirit, PolyCSAM offers a fully digital manufacturing environment and allows for the manufacturing & repair of parts and assemblies with sizes ranging from a few cm to several meters in length, and weight ranging from a few Kg to hundreds of Kg.<\/p>\n<\/div>
<\/a><\/span><\/div><\/div><\/div>Connect with us on LinkedIn<\/p>\n<\/div>
PolyCSAM<\/a><\/h5>\n\n- \n
Integration & Robotics<\/a><\/h5>\n<\/li>\n- \n
Powder Feeders for CS | SPS<\/a><\/h5>\n<\/li>\n- \n
Helium | N2 Gas Mixer for CS<\/a><\/h5>\n<\/li>\n- \n
Argon Recovery and Recirculation<\/a><\/h5>\n<\/li>\n- \n
Switch Over Tool Changer<\/a><\/h5>\n<\/li>\n- \n
Controllers for Cold Spray<\/a><\/h5>\n<\/li>\n- \n
Compressor for Cold Spray<\/a><\/h5>\n<\/li>\n<\/ul>\n<\/div><\/i>(450) 641-5546<\/span><\/a><\/div><\/div><\/div><\/div><\/div><\/div>The Value Proposition<\/h3><\/h3><\/div>\nPolyCSAM is a unique technology platform that closes the gap between the lab & a full-scale manufacturing environment by:<\/p>\n
\n- De-risking the development & validation phase for its clients<\/li>\n
- Reducing the time-to-deployment and time-to-market of the solutions developed<\/li>\n
- Allowing the fabrication of full-scale prototypes & components for validation, certification, and \/ or demonstration purposes<\/li>\n
- Allowing the manufacture or repair of large structural components through the synergetic use of multiple cutting-edge technologies<\/li>\n
- Offering advanced personnel training<\/li>\n
- Offering production backup\/overload services<\/li>\n<\/ul>\n
NRC\u2019s reputation in the relevant areas of cold spray, robotic machining, artificial intelligence and advanced materials is well established. This vast expertise, combined with Polycontrols\u2019 reputation and concrete achievements in the field of thermal\/cold spray and robotics represents a major asset for manufacturers who automatically get access to a pool of more than 60 experts in the field.<\/p>\n<\/div>\n<\/div><\/div><\/div>
<\/span><\/div><\/div><\/lite-youtube><\/div><\/div><\/div><\/div><\/div><\/div>Leadership at PolyCSAM<\/h2><\/h2><\/div><\/span><\/div><\/div><\/a>LUC POULIOT<\/strong><\/a>, <\/span><\/span>Eng. M.Sc.A. FASM<\/span><\/span>
\nDirector \u2013 PolyCSAM
\nCEO | Co-Owner | Polycontrols
\nTel.: (450) 444-3600<\/a> x312 | M. (514) 865-5763<\/a>
\nluc.pouliot@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div>\u00c9RIC IRISSOU<\/strong>, Ph.D.
\nTeam Leader, Thermal Spray
\nNational Research Council Canada
\nTel.: (438) 992-8903<\/a>
\neric.irissou@nrc-cnrc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div><\/a>FERNANDA CAIO<\/b><\/a>, Eng. M.Sc.
\nOperations Manager \u2013 PolyCSAM
\nPolycontrols Technologies Inc.
\nTel.: (438) 398-4758<\/a>
\nfernanda.caio@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div>MANUEL MARTIN<\/strong>, Ph.D.
\nTechnical Leader-Additive Manufacturing
\nfor Mass Customization
\nNational Research Council Canada
\nTel.: (450) 641-5356<\/a>
\nmanuel.martin@nrc-crnc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div><\/a>SYLVAIN DESAULNIERS<\/strong><\/a>, Eng., MBA
\n<\/span>President & CFO | Co-Owner
\nPolycontrols Technologies Inc.
\nTel.: (450) 444-3600<\/a> x301\u00a0 <\/span>|\u00a0 <\/span>M. (514) 895-4461<\/a>
\nsylvain.desaulniers@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div>JORG-OBERSTRE-BERGHAUS<\/b>, Ph.D.
\n<\/span>Senior Research Officer & Technical Leader
\nNational Research Council Canada
\nTel.: (514) 794-5893<\/a>
\nJorg.oberste-berghaus@nrc-cnrc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>CSAM Process Advantages<\/h3><\/h3><\/div>\nThe Cold Spray Additive Manufacturing process has several advantages over other 3D printing techniques:<\/p>\n
\n- No part size restrictions<\/li>\n
- No HAZ (Heat Affected Zone), so no damage to substrate or part<\/li>\n
- Multi-materials capability<\/li>\n
- Can be fully robotized<\/li>\n
- Batch production: from rapid prototyping to cost-effective manufacturing.<\/li>\n
- High deposit rate (several kg\/h)<\/li>\n
- Build on existing parts<\/li>\n
- Customization of components produced by traditional\/Mass production methods<\/li>\n
- Easily combined with conventional techniques such as machining & forging<\/li>\n
- Promoting a circular economy thanks to a Sustainable Process<\/li>\n<\/ul>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div><\/div>
Several Available Materials<\/h3><\/h3><\/div>\n\n\nAt PolyCSAM, we currently spray the following materials:<\/p>\n
\n- Al & alloys<\/li>\n
- Ti & alloys<\/li>\n
- Cu & alloys<\/li>\n
- Ni<\/span><\/li>\n
- Carbon steel<\/li>\n
- Tools steel<\/li>\n
- Stainless steel<\/li>\n<\/ul>\n<\/div>\n<\/section>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div>
Integration & Robotics<\/a><\/h5>\n<\/li>\n- \n
Powder Feeders for CS | SPS<\/a><\/h5>\n<\/li>\n- \n
Helium | N2 Gas Mixer for CS<\/a><\/h5>\n<\/li>\n- \n
Argon Recovery and Recirculation<\/a><\/h5>\n<\/li>\n- \n
Switch Over Tool Changer<\/a><\/h5>\n<\/li>\n- \n
Controllers for Cold Spray<\/a><\/h5>\n<\/li>\n- \n
Compressor for Cold Spray<\/a><\/h5>\n<\/li>\n<\/ul>\n<\/div><\/i>(450) 641-5546<\/span><\/a><\/div><\/div><\/div><\/div><\/div><\/div>The Value Proposition<\/h3><\/h3><\/div>\nPolyCSAM is a unique technology platform that closes the gap between the lab & a full-scale manufacturing environment by:<\/p>\n
\n- De-risking the development & validation phase for its clients<\/li>\n
- Reducing the time-to-deployment and time-to-market of the solutions developed<\/li>\n
- Allowing the fabrication of full-scale prototypes & components for validation, certification, and \/ or demonstration purposes<\/li>\n
- Allowing the manufacture or repair of large structural components through the synergetic use of multiple cutting-edge technologies<\/li>\n
- Offering advanced personnel training<\/li>\n
- Offering production backup\/overload services<\/li>\n<\/ul>\n
NRC\u2019s reputation in the relevant areas of cold spray, robotic machining, artificial intelligence and advanced materials is well established. This vast expertise, combined with Polycontrols\u2019 reputation and concrete achievements in the field of thermal\/cold spray and robotics represents a major asset for manufacturers who automatically get access to a pool of more than 60 experts in the field.<\/p>\n<\/div>\n<\/div><\/div><\/div>
<\/span><\/div><\/div><\/lite-youtube><\/div><\/div><\/div><\/div><\/div><\/div>Leadership at PolyCSAM<\/h2><\/h2><\/div><\/span><\/div><\/div><\/a>LUC POULIOT<\/strong><\/a>, <\/span><\/span>Eng. M.Sc.A. FASM<\/span><\/span>
\nDirector \u2013 PolyCSAM
\nCEO | Co-Owner | Polycontrols
\nTel.: (450) 444-3600<\/a> x312 | M. (514) 865-5763<\/a>
\nluc.pouliot@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div>\u00c9RIC IRISSOU<\/strong>, Ph.D.
\nTeam Leader, Thermal Spray
\nNational Research Council Canada
\nTel.: (438) 992-8903<\/a>
\neric.irissou@nrc-cnrc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div><\/a>FERNANDA CAIO<\/b><\/a>, Eng. M.Sc.
\nOperations Manager \u2013 PolyCSAM
\nPolycontrols Technologies Inc.
\nTel.: (438) 398-4758<\/a>
\nfernanda.caio@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div>MANUEL MARTIN<\/strong>, Ph.D.
\nTechnical Leader-Additive Manufacturing
\nfor Mass Customization
\nNational Research Council Canada
\nTel.: (450) 641-5356<\/a>
\nmanuel.martin@nrc-crnc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div><\/a>SYLVAIN DESAULNIERS<\/strong><\/a>, Eng., MBA
\n<\/span>President & CFO | Co-Owner
\nPolycontrols Technologies Inc.
\nTel.: (450) 444-3600<\/a> x301\u00a0 <\/span>|\u00a0 <\/span>M. (514) 895-4461<\/a>
\nsylvain.desaulniers@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div>JORG-OBERSTRE-BERGHAUS<\/b>, Ph.D.
\n<\/span>Senior Research Officer & Technical Leader
\nNational Research Council Canada
\nTel.: (514) 794-5893<\/a>
\nJorg.oberste-berghaus@nrc-cnrc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>CSAM Process Advantages<\/h3><\/h3><\/div>\nThe Cold Spray Additive Manufacturing process has several advantages over other 3D printing techniques:<\/p>\n
\n- No part size restrictions<\/li>\n
- No HAZ (Heat Affected Zone), so no damage to substrate or part<\/li>\n
- Multi-materials capability<\/li>\n
- Can be fully robotized<\/li>\n
- Batch production: from rapid prototyping to cost-effective manufacturing.<\/li>\n
- High deposit rate (several kg\/h)<\/li>\n
- Build on existing parts<\/li>\n
- Customization of components produced by traditional\/Mass production methods<\/li>\n
- Easily combined with conventional techniques such as machining & forging<\/li>\n
- Promoting a circular economy thanks to a Sustainable Process<\/li>\n<\/ul>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div><\/div>
Several Available Materials<\/h3><\/h3><\/div>\n\n\nAt PolyCSAM, we currently spray the following materials:<\/p>\n
\n- Al & alloys<\/li>\n
- Ti & alloys<\/li>\n
- Cu & alloys<\/li>\n
- Ni<\/span><\/li>\n
- Carbon steel<\/li>\n
- Tools steel<\/li>\n
- Stainless steel<\/li>\n<\/ul>\n<\/div>\n<\/section>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div>
Powder Feeders for CS | SPS<\/a><\/h5>\n<\/li>\n- \n
Helium | N2 Gas Mixer for CS<\/a><\/h5>\n<\/li>\n- \n
Argon Recovery and Recirculation<\/a><\/h5>\n<\/li>\n- \n
Switch Over Tool Changer<\/a><\/h5>\n<\/li>\n- \n
Controllers for Cold Spray<\/a><\/h5>\n<\/li>\n- \n
Compressor for Cold Spray<\/a><\/h5>\n<\/li>\n<\/ul>\n<\/div><\/i>(450) 641-5546<\/span><\/a><\/div><\/div><\/div><\/div><\/div><\/div>The Value Proposition<\/h3><\/h3><\/div>\nPolyCSAM is a unique technology platform that closes the gap between the lab & a full-scale manufacturing environment by:<\/p>\n
\n- De-risking the development & validation phase for its clients<\/li>\n
- Reducing the time-to-deployment and time-to-market of the solutions developed<\/li>\n
- Allowing the fabrication of full-scale prototypes & components for validation, certification, and \/ or demonstration purposes<\/li>\n
- Allowing the manufacture or repair of large structural components through the synergetic use of multiple cutting-edge technologies<\/li>\n
- Offering advanced personnel training<\/li>\n
- Offering production backup\/overload services<\/li>\n<\/ul>\n
NRC\u2019s reputation in the relevant areas of cold spray, robotic machining, artificial intelligence and advanced materials is well established. This vast expertise, combined with Polycontrols\u2019 reputation and concrete achievements in the field of thermal\/cold spray and robotics represents a major asset for manufacturers who automatically get access to a pool of more than 60 experts in the field.<\/p>\n<\/div>\n<\/div><\/div><\/div>
<\/span><\/div><\/div><\/lite-youtube><\/div><\/div><\/div><\/div><\/div><\/div>Leadership at PolyCSAM<\/h2><\/h2><\/div><\/span><\/div><\/div><\/a>LUC POULIOT<\/strong><\/a>, <\/span><\/span>Eng. M.Sc.A. FASM<\/span><\/span>
\nDirector \u2013 PolyCSAM
\nCEO | Co-Owner | Polycontrols
\nTel.: (450) 444-3600<\/a> x312 | M. (514) 865-5763<\/a>
\nluc.pouliot@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div>\u00c9RIC IRISSOU<\/strong>, Ph.D.
\nTeam Leader, Thermal Spray
\nNational Research Council Canada
\nTel.: (438) 992-8903<\/a>
\neric.irissou@nrc-cnrc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div><\/a>FERNANDA CAIO<\/b><\/a>, Eng. M.Sc.
\nOperations Manager \u2013 PolyCSAM
\nPolycontrols Technologies Inc.
\nTel.: (438) 398-4758<\/a>
\nfernanda.caio@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div>MANUEL MARTIN<\/strong>, Ph.D.
\nTechnical Leader-Additive Manufacturing
\nfor Mass Customization
\nNational Research Council Canada
\nTel.: (450) 641-5356<\/a>
\nmanuel.martin@nrc-crnc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div><\/a>SYLVAIN DESAULNIERS<\/strong><\/a>, Eng., MBA
\n<\/span>President & CFO | Co-Owner
\nPolycontrols Technologies Inc.
\nTel.: (450) 444-3600<\/a> x301\u00a0 <\/span>|\u00a0 <\/span>M. (514) 895-4461<\/a>
\nsylvain.desaulniers@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div>JORG-OBERSTRE-BERGHAUS<\/b>, Ph.D.
\n<\/span>Senior Research Officer & Technical Leader
\nNational Research Council Canada
\nTel.: (514) 794-5893<\/a>
\nJorg.oberste-berghaus@nrc-cnrc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>CSAM Process Advantages<\/h3><\/h3><\/div>\nThe Cold Spray Additive Manufacturing process has several advantages over other 3D printing techniques:<\/p>\n
\n- No part size restrictions<\/li>\n
- No HAZ (Heat Affected Zone), so no damage to substrate or part<\/li>\n
- Multi-materials capability<\/li>\n
- Can be fully robotized<\/li>\n
- Batch production: from rapid prototyping to cost-effective manufacturing.<\/li>\n
- High deposit rate (several kg\/h)<\/li>\n
- Build on existing parts<\/li>\n
- Customization of components produced by traditional\/Mass production methods<\/li>\n
- Easily combined with conventional techniques such as machining & forging<\/li>\n
- Promoting a circular economy thanks to a Sustainable Process<\/li>\n<\/ul>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div><\/div>
Several Available Materials<\/h3><\/h3><\/div>\n\n\nAt PolyCSAM, we currently spray the following materials:<\/p>\n
\n- Al & alloys<\/li>\n
- Ti & alloys<\/li>\n
- Cu & alloys<\/li>\n
- Ni<\/span><\/li>\n
- Carbon steel<\/li>\n
- Tools steel<\/li>\n
- Stainless steel<\/li>\n<\/ul>\n<\/div>\n<\/section>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div>
Helium | N2 Gas Mixer for CS<\/a><\/h5>\n<\/li>\n- \n
Argon Recovery and Recirculation<\/a><\/h5>\n<\/li>\n- \n
Switch Over Tool Changer<\/a><\/h5>\n<\/li>\n- \n
Controllers for Cold Spray<\/a><\/h5>\n<\/li>\n- \n
Compressor for Cold Spray<\/a><\/h5>\n<\/li>\n<\/ul>\n<\/div><\/i>(450) 641-5546<\/span><\/a><\/div><\/div><\/div><\/div><\/div><\/div>The Value Proposition<\/h3><\/h3><\/div>\nPolyCSAM is a unique technology platform that closes the gap between the lab & a full-scale manufacturing environment by:<\/p>\n
\n- De-risking the development & validation phase for its clients<\/li>\n
- Reducing the time-to-deployment and time-to-market of the solutions developed<\/li>\n
- Allowing the fabrication of full-scale prototypes & components for validation, certification, and \/ or demonstration purposes<\/li>\n
- Allowing the manufacture or repair of large structural components through the synergetic use of multiple cutting-edge technologies<\/li>\n
- Offering advanced personnel training<\/li>\n
- Offering production backup\/overload services<\/li>\n<\/ul>\n
NRC\u2019s reputation in the relevant areas of cold spray, robotic machining, artificial intelligence and advanced materials is well established. This vast expertise, combined with Polycontrols\u2019 reputation and concrete achievements in the field of thermal\/cold spray and robotics represents a major asset for manufacturers who automatically get access to a pool of more than 60 experts in the field.<\/p>\n<\/div>\n<\/div><\/div><\/div>
<\/span><\/div><\/div><\/lite-youtube><\/div><\/div><\/div><\/div><\/div><\/div>Leadership at PolyCSAM<\/h2><\/h2><\/div><\/span><\/div><\/div><\/a>LUC POULIOT<\/strong><\/a>, <\/span><\/span>Eng. M.Sc.A. FASM<\/span><\/span>
\nDirector \u2013 PolyCSAM
\nCEO | Co-Owner | Polycontrols
\nTel.: (450) 444-3600<\/a> x312 | M. (514) 865-5763<\/a>
\nluc.pouliot@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div>\u00c9RIC IRISSOU<\/strong>, Ph.D.
\nTeam Leader, Thermal Spray
\nNational Research Council Canada
\nTel.: (438) 992-8903<\/a>
\neric.irissou@nrc-cnrc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div><\/a>FERNANDA CAIO<\/b><\/a>, Eng. M.Sc.
\nOperations Manager \u2013 PolyCSAM
\nPolycontrols Technologies Inc.
\nTel.: (438) 398-4758<\/a>
\nfernanda.caio@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div>MANUEL MARTIN<\/strong>, Ph.D.
\nTechnical Leader-Additive Manufacturing
\nfor Mass Customization
\nNational Research Council Canada
\nTel.: (450) 641-5356<\/a>
\nmanuel.martin@nrc-crnc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div><\/a>SYLVAIN DESAULNIERS<\/strong><\/a>, Eng., MBA
\n<\/span>President & CFO | Co-Owner
\nPolycontrols Technologies Inc.
\nTel.: (450) 444-3600<\/a> x301\u00a0 <\/span>|\u00a0 <\/span>M. (514) 895-4461<\/a>
\nsylvain.desaulniers@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div>JORG-OBERSTRE-BERGHAUS<\/b>, Ph.D.
\n<\/span>Senior Research Officer & Technical Leader
\nNational Research Council Canada
\nTel.: (514) 794-5893<\/a>
\nJorg.oberste-berghaus@nrc-cnrc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>CSAM Process Advantages<\/h3><\/h3><\/div>\nThe Cold Spray Additive Manufacturing process has several advantages over other 3D printing techniques:<\/p>\n
\n- No part size restrictions<\/li>\n
- No HAZ (Heat Affected Zone), so no damage to substrate or part<\/li>\n
- Multi-materials capability<\/li>\n
- Can be fully robotized<\/li>\n
- Batch production: from rapid prototyping to cost-effective manufacturing.<\/li>\n
- High deposit rate (several kg\/h)<\/li>\n
- Build on existing parts<\/li>\n
- Customization of components produced by traditional\/Mass production methods<\/li>\n
- Easily combined with conventional techniques such as machining & forging<\/li>\n
- Promoting a circular economy thanks to a Sustainable Process<\/li>\n<\/ul>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div><\/div>
Several Available Materials<\/h3><\/h3><\/div>\n\n\nAt PolyCSAM, we currently spray the following materials:<\/p>\n
\n- Al & alloys<\/li>\n
- Ti & alloys<\/li>\n
- Cu & alloys<\/li>\n
- Ni<\/span><\/li>\n
- Carbon steel<\/li>\n
- Tools steel<\/li>\n
- Stainless steel<\/li>\n<\/ul>\n<\/div>\n<\/section>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div>
Argon Recovery and Recirculation<\/a><\/h5>\n<\/li>\n- \n
Switch Over Tool Changer<\/a><\/h5>\n<\/li>\n- \n
Controllers for Cold Spray<\/a><\/h5>\n<\/li>\n- \n
Compressor for Cold Spray<\/a><\/h5>\n<\/li>\n<\/ul>\n<\/div><\/i>(450) 641-5546<\/span><\/a><\/div><\/div><\/div><\/div><\/div><\/div>The Value Proposition<\/h3><\/h3><\/div>\nPolyCSAM is a unique technology platform that closes the gap between the lab & a full-scale manufacturing environment by:<\/p>\n
\n- De-risking the development & validation phase for its clients<\/li>\n
- Reducing the time-to-deployment and time-to-market of the solutions developed<\/li>\n
- Allowing the fabrication of full-scale prototypes & components for validation, certification, and \/ or demonstration purposes<\/li>\n
- Allowing the manufacture or repair of large structural components through the synergetic use of multiple cutting-edge technologies<\/li>\n
- Offering advanced personnel training<\/li>\n
- Offering production backup\/overload services<\/li>\n<\/ul>\n
NRC\u2019s reputation in the relevant areas of cold spray, robotic machining, artificial intelligence and advanced materials is well established. This vast expertise, combined with Polycontrols\u2019 reputation and concrete achievements in the field of thermal\/cold spray and robotics represents a major asset for manufacturers who automatically get access to a pool of more than 60 experts in the field.<\/p>\n<\/div>\n<\/div><\/div><\/div>
<\/span><\/div><\/div><\/lite-youtube><\/div><\/div><\/div><\/div><\/div><\/div>Leadership at PolyCSAM<\/h2><\/h2><\/div><\/span><\/div><\/div><\/a>LUC POULIOT<\/strong><\/a>, <\/span><\/span>Eng. M.Sc.A. FASM<\/span><\/span>
\nDirector \u2013 PolyCSAM
\nCEO | Co-Owner | Polycontrols
\nTel.: (450) 444-3600<\/a> x312 | M. (514) 865-5763<\/a>
\nluc.pouliot@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div>\u00c9RIC IRISSOU<\/strong>, Ph.D.
\nTeam Leader, Thermal Spray
\nNational Research Council Canada
\nTel.: (438) 992-8903<\/a>
\neric.irissou@nrc-cnrc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div><\/a>FERNANDA CAIO<\/b><\/a>, Eng. M.Sc.
\nOperations Manager \u2013 PolyCSAM
\nPolycontrols Technologies Inc.
\nTel.: (438) 398-4758<\/a>
\nfernanda.caio@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div>MANUEL MARTIN<\/strong>, Ph.D.
\nTechnical Leader-Additive Manufacturing
\nfor Mass Customization
\nNational Research Council Canada
\nTel.: (450) 641-5356<\/a>
\nmanuel.martin@nrc-crnc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div><\/a>SYLVAIN DESAULNIERS<\/strong><\/a>, Eng., MBA
\n<\/span>President & CFO | Co-Owner
\nPolycontrols Technologies Inc.
\nTel.: (450) 444-3600<\/a> x301\u00a0 <\/span>|\u00a0 <\/span>M. (514) 895-4461<\/a>
\nsylvain.desaulniers@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div>JORG-OBERSTRE-BERGHAUS<\/b>, Ph.D.
\n<\/span>Senior Research Officer & Technical Leader
\nNational Research Council Canada
\nTel.: (514) 794-5893<\/a>
\nJorg.oberste-berghaus@nrc-cnrc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>CSAM Process Advantages<\/h3><\/h3><\/div>\nThe Cold Spray Additive Manufacturing process has several advantages over other 3D printing techniques:<\/p>\n
\n- No part size restrictions<\/li>\n
- No HAZ (Heat Affected Zone), so no damage to substrate or part<\/li>\n
- Multi-materials capability<\/li>\n
- Can be fully robotized<\/li>\n
- Batch production: from rapid prototyping to cost-effective manufacturing.<\/li>\n
- High deposit rate (several kg\/h)<\/li>\n
- Build on existing parts<\/li>\n
- Customization of components produced by traditional\/Mass production methods<\/li>\n
- Easily combined with conventional techniques such as machining & forging<\/li>\n
- Promoting a circular economy thanks to a Sustainable Process<\/li>\n<\/ul>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div><\/div>
Several Available Materials<\/h3><\/h3><\/div>\n\n\nAt PolyCSAM, we currently spray the following materials:<\/p>\n
\n- Al & alloys<\/li>\n
- Ti & alloys<\/li>\n
- Cu & alloys<\/li>\n
- Ni<\/span><\/li>\n
- Carbon steel<\/li>\n
- Tools steel<\/li>\n
- Stainless steel<\/li>\n<\/ul>\n<\/div>\n<\/section>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div>
Switch Over Tool Changer<\/a><\/h5>\n<\/li>\n- \n
Controllers for Cold Spray<\/a><\/h5>\n<\/li>\n- \n
Compressor for Cold Spray<\/a><\/h5>\n<\/li>\n<\/ul>\n<\/div><\/i>(450) 641-5546<\/span><\/a><\/div><\/div><\/div><\/div><\/div><\/div>The Value Proposition<\/h3><\/h3><\/div>\nPolyCSAM is a unique technology platform that closes the gap between the lab & a full-scale manufacturing environment by:<\/p>\n
\n- De-risking the development & validation phase for its clients<\/li>\n
- Reducing the time-to-deployment and time-to-market of the solutions developed<\/li>\n
- Allowing the fabrication of full-scale prototypes & components for validation, certification, and \/ or demonstration purposes<\/li>\n
- Allowing the manufacture or repair of large structural components through the synergetic use of multiple cutting-edge technologies<\/li>\n
- Offering advanced personnel training<\/li>\n
- Offering production backup\/overload services<\/li>\n<\/ul>\n
NRC\u2019s reputation in the relevant areas of cold spray, robotic machining, artificial intelligence and advanced materials is well established. This vast expertise, combined with Polycontrols\u2019 reputation and concrete achievements in the field of thermal\/cold spray and robotics represents a major asset for manufacturers who automatically get access to a pool of more than 60 experts in the field.<\/p>\n<\/div>\n<\/div><\/div><\/div>
<\/span><\/div><\/div><\/lite-youtube><\/div><\/div><\/div><\/div><\/div><\/div>Leadership at PolyCSAM<\/h2><\/h2><\/div><\/span><\/div><\/div><\/a>LUC POULIOT<\/strong><\/a>, <\/span><\/span>Eng. M.Sc.A. FASM<\/span><\/span>
\nDirector \u2013 PolyCSAM
\nCEO | Co-Owner | Polycontrols
\nTel.: (450) 444-3600<\/a> x312 | M. (514) 865-5763<\/a>
\nluc.pouliot@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div>\u00c9RIC IRISSOU<\/strong>, Ph.D.
\nTeam Leader, Thermal Spray
\nNational Research Council Canada
\nTel.: (438) 992-8903<\/a>
\neric.irissou@nrc-cnrc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div><\/a>FERNANDA CAIO<\/b><\/a>, Eng. M.Sc.
\nOperations Manager \u2013 PolyCSAM
\nPolycontrols Technologies Inc.
\nTel.: (438) 398-4758<\/a>
\nfernanda.caio@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div>MANUEL MARTIN<\/strong>, Ph.D.
\nTechnical Leader-Additive Manufacturing
\nfor Mass Customization
\nNational Research Council Canada
\nTel.: (450) 641-5356<\/a>
\nmanuel.martin@nrc-crnc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div><\/a>SYLVAIN DESAULNIERS<\/strong><\/a>, Eng., MBA
\n<\/span>President & CFO | Co-Owner
\nPolycontrols Technologies Inc.
\nTel.: (450) 444-3600<\/a> x301\u00a0 <\/span>|\u00a0 <\/span>M. (514) 895-4461<\/a>
\nsylvain.desaulniers@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div>JORG-OBERSTRE-BERGHAUS<\/b>, Ph.D.
\n<\/span>Senior Research Officer & Technical Leader
\nNational Research Council Canada
\nTel.: (514) 794-5893<\/a>
\nJorg.oberste-berghaus@nrc-cnrc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>CSAM Process Advantages<\/h3><\/h3><\/div>\nThe Cold Spray Additive Manufacturing process has several advantages over other 3D printing techniques:<\/p>\n
\n- No part size restrictions<\/li>\n
- No HAZ (Heat Affected Zone), so no damage to substrate or part<\/li>\n
- Multi-materials capability<\/li>\n
- Can be fully robotized<\/li>\n
- Batch production: from rapid prototyping to cost-effective manufacturing.<\/li>\n
- High deposit rate (several kg\/h)<\/li>\n
- Build on existing parts<\/li>\n
- Customization of components produced by traditional\/Mass production methods<\/li>\n
- Easily combined with conventional techniques such as machining & forging<\/li>\n
- Promoting a circular economy thanks to a Sustainable Process<\/li>\n<\/ul>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div><\/div>
Several Available Materials<\/h3><\/h3><\/div>\n\n\nAt PolyCSAM, we currently spray the following materials:<\/p>\n
\n- Al & alloys<\/li>\n
- Ti & alloys<\/li>\n
- Cu & alloys<\/li>\n
- Ni<\/span><\/li>\n
- Carbon steel<\/li>\n
- Tools steel<\/li>\n
- Stainless steel<\/li>\n<\/ul>\n<\/div>\n<\/section>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div>
Controllers for Cold Spray<\/a><\/h5>\n<\/li>\n- \n
Compressor for Cold Spray<\/a><\/h5>\n<\/li>\n<\/ul>\n<\/div><\/i>(450) 641-5546<\/span><\/a><\/div><\/div><\/div><\/div><\/div><\/div>The Value Proposition<\/h3><\/h3><\/div>\nPolyCSAM is a unique technology platform that closes the gap between the lab & a full-scale manufacturing environment by:<\/p>\n
\n- De-risking the development & validation phase for its clients<\/li>\n
- Reducing the time-to-deployment and time-to-market of the solutions developed<\/li>\n
- Allowing the fabrication of full-scale prototypes & components for validation, certification, and \/ or demonstration purposes<\/li>\n
- Allowing the manufacture or repair of large structural components through the synergetic use of multiple cutting-edge technologies<\/li>\n
- Offering advanced personnel training<\/li>\n
- Offering production backup\/overload services<\/li>\n<\/ul>\n
NRC\u2019s reputation in the relevant areas of cold spray, robotic machining, artificial intelligence and advanced materials is well established. This vast expertise, combined with Polycontrols\u2019 reputation and concrete achievements in the field of thermal\/cold spray and robotics represents a major asset for manufacturers who automatically get access to a pool of more than 60 experts in the field.<\/p>\n<\/div>\n<\/div><\/div><\/div>
<\/span><\/div><\/div><\/lite-youtube><\/div><\/div><\/div><\/div><\/div><\/div>Leadership at PolyCSAM<\/h2><\/h2><\/div><\/span><\/div><\/div><\/a>LUC POULIOT<\/strong><\/a>, <\/span><\/span>Eng. M.Sc.A. FASM<\/span><\/span>
\nDirector \u2013 PolyCSAM
\nCEO | Co-Owner | Polycontrols
\nTel.: (450) 444-3600<\/a> x312 | M. (514) 865-5763<\/a>
\nluc.pouliot@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div>\u00c9RIC IRISSOU<\/strong>, Ph.D.
\nTeam Leader, Thermal Spray
\nNational Research Council Canada
\nTel.: (438) 992-8903<\/a>
\neric.irissou@nrc-cnrc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div><\/a>FERNANDA CAIO<\/b><\/a>, Eng. M.Sc.
\nOperations Manager \u2013 PolyCSAM
\nPolycontrols Technologies Inc.
\nTel.: (438) 398-4758<\/a>
\nfernanda.caio@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div>MANUEL MARTIN<\/strong>, Ph.D.
\nTechnical Leader-Additive Manufacturing
\nfor Mass Customization
\nNational Research Council Canada
\nTel.: (450) 641-5356<\/a>
\nmanuel.martin@nrc-crnc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div><\/a>SYLVAIN DESAULNIERS<\/strong><\/a>, Eng., MBA
\n<\/span>President & CFO | Co-Owner
\nPolycontrols Technologies Inc.
\nTel.: (450) 444-3600<\/a> x301\u00a0 <\/span>|\u00a0 <\/span>M. (514) 895-4461<\/a>
\nsylvain.desaulniers@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div>JORG-OBERSTRE-BERGHAUS<\/b>, Ph.D.
\n<\/span>Senior Research Officer & Technical Leader
\nNational Research Council Canada
\nTel.: (514) 794-5893<\/a>
\nJorg.oberste-berghaus@nrc-cnrc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>CSAM Process Advantages<\/h3><\/h3><\/div>\nThe Cold Spray Additive Manufacturing process has several advantages over other 3D printing techniques:<\/p>\n
\n- No part size restrictions<\/li>\n
- No HAZ (Heat Affected Zone), so no damage to substrate or part<\/li>\n
- Multi-materials capability<\/li>\n
- Can be fully robotized<\/li>\n
- Batch production: from rapid prototyping to cost-effective manufacturing.<\/li>\n
- High deposit rate (several kg\/h)<\/li>\n
- Build on existing parts<\/li>\n
- Customization of components produced by traditional\/Mass production methods<\/li>\n
- Easily combined with conventional techniques such as machining & forging<\/li>\n
- Promoting a circular economy thanks to a Sustainable Process<\/li>\n<\/ul>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div><\/div>
Several Available Materials<\/h3><\/h3><\/div>\n\n\nAt PolyCSAM, we currently spray the following materials:<\/p>\n
\n- Al & alloys<\/li>\n
- Ti & alloys<\/li>\n
- Cu & alloys<\/li>\n
- Ni<\/span><\/li>\n
- Carbon steel<\/li>\n
- Tools steel<\/li>\n
- Stainless steel<\/li>\n<\/ul>\n<\/div>\n<\/section>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div>
Compressor for Cold Spray<\/a><\/h5>\n<\/li>\n<\/ul>\n<\/div><\/i>(450) 641-5546<\/span><\/a><\/div><\/div><\/div><\/div><\/div><\/div>The Value Proposition<\/h3><\/h3><\/div>\nPolyCSAM is a unique technology platform that closes the gap between the lab & a full-scale manufacturing environment by:<\/p>\n
\n- De-risking the development & validation phase for its clients<\/li>\n
- Reducing the time-to-deployment and time-to-market of the solutions developed<\/li>\n
- Allowing the fabrication of full-scale prototypes & components for validation, certification, and \/ or demonstration purposes<\/li>\n
- Allowing the manufacture or repair of large structural components through the synergetic use of multiple cutting-edge technologies<\/li>\n
- Offering advanced personnel training<\/li>\n
- Offering production backup\/overload services<\/li>\n<\/ul>\n
NRC\u2019s reputation in the relevant areas of cold spray, robotic machining, artificial intelligence and advanced materials is well established. This vast expertise, combined with Polycontrols\u2019 reputation and concrete achievements in the field of thermal\/cold spray and robotics represents a major asset for manufacturers who automatically get access to a pool of more than 60 experts in the field.<\/p>\n<\/div>\n<\/div><\/div><\/div>
<\/span><\/div><\/div><\/lite-youtube><\/div><\/div><\/div><\/div><\/div><\/div>Leadership at PolyCSAM<\/h2><\/h2><\/div><\/span><\/div><\/div><\/a>LUC POULIOT<\/strong><\/a>, <\/span><\/span>Eng. M.Sc.A. FASM<\/span><\/span>
\nDirector \u2013 PolyCSAM
\nCEO | Co-Owner | Polycontrols
\nTel.: (450) 444-3600<\/a> x312 | M. (514) 865-5763<\/a>
\nluc.pouliot@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div>\u00c9RIC IRISSOU<\/strong>, Ph.D.
\nTeam Leader, Thermal Spray
\nNational Research Council Canada
\nTel.: (438) 992-8903<\/a>
\neric.irissou@nrc-cnrc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div><\/a>FERNANDA CAIO<\/b><\/a>, Eng. M.Sc.
\nOperations Manager \u2013 PolyCSAM
\nPolycontrols Technologies Inc.
\nTel.: (438) 398-4758<\/a>
\nfernanda.caio@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div>MANUEL MARTIN<\/strong>, Ph.D.
\nTechnical Leader-Additive Manufacturing
\nfor Mass Customization
\nNational Research Council Canada
\nTel.: (450) 641-5356<\/a>
\nmanuel.martin@nrc-crnc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div><\/a>SYLVAIN DESAULNIERS<\/strong><\/a>, Eng., MBA
\n<\/span>President & CFO | Co-Owner
\nPolycontrols Technologies Inc.
\nTel.: (450) 444-3600<\/a> x301\u00a0 <\/span>|\u00a0 <\/span>M. (514) 895-4461<\/a>
\nsylvain.desaulniers@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div>JORG-OBERSTRE-BERGHAUS<\/b>, Ph.D.
\n<\/span>Senior Research Officer & Technical Leader
\nNational Research Council Canada
\nTel.: (514) 794-5893<\/a>
\nJorg.oberste-berghaus@nrc-cnrc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>CSAM Process Advantages<\/h3><\/h3><\/div>\nThe Cold Spray Additive Manufacturing process has several advantages over other 3D printing techniques:<\/p>\n
\n- No part size restrictions<\/li>\n
- No HAZ (Heat Affected Zone), so no damage to substrate or part<\/li>\n
- Multi-materials capability<\/li>\n
- Can be fully robotized<\/li>\n
- Batch production: from rapid prototyping to cost-effective manufacturing.<\/li>\n
- High deposit rate (several kg\/h)<\/li>\n
- Build on existing parts<\/li>\n
- Customization of components produced by traditional\/Mass production methods<\/li>\n
- Easily combined with conventional techniques such as machining & forging<\/li>\n
- Promoting a circular economy thanks to a Sustainable Process<\/li>\n<\/ul>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div><\/div>
Several Available Materials<\/h3><\/h3><\/div>\n\n\nAt PolyCSAM, we currently spray the following materials:<\/p>\n
\n- Al & alloys<\/li>\n
- Ti & alloys<\/li>\n
- Cu & alloys<\/li>\n
- Ni<\/span><\/li>\n
- Carbon steel<\/li>\n
- Tools steel<\/li>\n
- Stainless steel<\/li>\n<\/ul>\n<\/div>\n<\/section>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div>
The Value Proposition<\/h3><\/h3><\/div>\nPolyCSAM is a unique technology platform that closes the gap between the lab & a full-scale manufacturing environment by:<\/p>\n
\n- De-risking the development & validation phase for its clients<\/li>\n
- Reducing the time-to-deployment and time-to-market of the solutions developed<\/li>\n
- Allowing the fabrication of full-scale prototypes & components for validation, certification, and \/ or demonstration purposes<\/li>\n
- Allowing the manufacture or repair of large structural components through the synergetic use of multiple cutting-edge technologies<\/li>\n
- Offering advanced personnel training<\/li>\n
- Offering production backup\/overload services<\/li>\n<\/ul>\n
NRC\u2019s reputation in the relevant areas of cold spray, robotic machining, artificial intelligence and advanced materials is well established. This vast expertise, combined with Polycontrols\u2019 reputation and concrete achievements in the field of thermal\/cold spray and robotics represents a major asset for manufacturers who automatically get access to a pool of more than 60 experts in the field.<\/p>\n<\/div>\n<\/div><\/div><\/div>
<\/span><\/div><\/div><\/lite-youtube><\/div><\/div><\/div><\/div><\/div><\/div>Leadership at PolyCSAM<\/h2><\/h2><\/div><\/span><\/div><\/div><\/a>LUC POULIOT<\/strong><\/a>, <\/span><\/span>Eng. M.Sc.A. FASM<\/span><\/span>
\nDirector \u2013 PolyCSAM
\nCEO | Co-Owner | Polycontrols
\nTel.: (450) 444-3600<\/a> x312 | M. (514) 865-5763<\/a>
\nluc.pouliot@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div>\u00c9RIC IRISSOU<\/strong>, Ph.D.
\nTeam Leader, Thermal Spray
\nNational Research Council Canada
\nTel.: (438) 992-8903<\/a>
\neric.irissou@nrc-cnrc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div><\/a>FERNANDA CAIO<\/b><\/a>, Eng. M.Sc.
\nOperations Manager \u2013 PolyCSAM
\nPolycontrols Technologies Inc.
\nTel.: (438) 398-4758<\/a>
\nfernanda.caio@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div>MANUEL MARTIN<\/strong>, Ph.D.
\nTechnical Leader-Additive Manufacturing
\nfor Mass Customization
\nNational Research Council Canada
\nTel.: (450) 641-5356<\/a>
\nmanuel.martin@nrc-crnc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div><\/a>SYLVAIN DESAULNIERS<\/strong><\/a>, Eng., MBA
\n<\/span>President & CFO | Co-Owner
\nPolycontrols Technologies Inc.
\nTel.: (450) 444-3600<\/a> x301\u00a0 <\/span>|\u00a0 <\/span>M. (514) 895-4461<\/a>
\nsylvain.desaulniers@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div>JORG-OBERSTRE-BERGHAUS<\/b>, Ph.D.
\n<\/span>Senior Research Officer & Technical Leader
\nNational Research Council Canada
\nTel.: (514) 794-5893<\/a>
\nJorg.oberste-berghaus@nrc-cnrc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>CSAM Process Advantages<\/h3><\/h3><\/div>\nThe Cold Spray Additive Manufacturing process has several advantages over other 3D printing techniques:<\/p>\n
\n- No part size restrictions<\/li>\n
- No HAZ (Heat Affected Zone), so no damage to substrate or part<\/li>\n
- Multi-materials capability<\/li>\n
- Can be fully robotized<\/li>\n
- Batch production: from rapid prototyping to cost-effective manufacturing.<\/li>\n
- High deposit rate (several kg\/h)<\/li>\n
- Build on existing parts<\/li>\n
- Customization of components produced by traditional\/Mass production methods<\/li>\n
- Easily combined with conventional techniques such as machining & forging<\/li>\n
- Promoting a circular economy thanks to a Sustainable Process<\/li>\n<\/ul>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div><\/div>
Several Available Materials<\/h3><\/h3><\/div>\n\n\nAt PolyCSAM, we currently spray the following materials:<\/p>\n
\n- Al & alloys<\/li>\n
- Ti & alloys<\/li>\n
- Cu & alloys<\/li>\n
- Ni<\/span><\/li>\n
- Carbon steel<\/li>\n
- Tools steel<\/li>\n
- Stainless steel<\/li>\n<\/ul>\n<\/div>\n<\/section>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div>
PolyCSAM is a unique technology platform that closes the gap between the lab & a full-scale manufacturing environment by:<\/p>\n
- \n
- De-risking the development & validation phase for its clients<\/li>\n
- Reducing the time-to-deployment and time-to-market of the solutions developed<\/li>\n
- Allowing the fabrication of full-scale prototypes & components for validation, certification, and \/ or demonstration purposes<\/li>\n
- Allowing the manufacture or repair of large structural components through the synergetic use of multiple cutting-edge technologies<\/li>\n
- Offering advanced personnel training<\/li>\n
- Offering production backup\/overload services<\/li>\n<\/ul>\n
NRC\u2019s reputation in the relevant areas of cold spray, robotic machining, artificial intelligence and advanced materials is well established. This vast expertise, combined with Polycontrols\u2019 reputation and concrete achievements in the field of thermal\/cold spray and robotics represents a major asset for manufacturers who automatically get access to a pool of more than 60 experts in the field.<\/p>\n<\/div>\n<\/div><\/div><\/div>
<\/span><\/div><\/div><\/lite-youtube><\/div><\/div><\/div><\/div><\/div><\/div> Leadership at PolyCSAM<\/h2><\/h2><\/div>
<\/span><\/div><\/div><\/a>LUC POULIOT<\/strong><\/a>, <\/span><\/span>Eng. M.Sc.A. FASM<\/span><\/span>
\nDirector \u2013 PolyCSAM
\nCEO | Co-Owner | Polycontrols
\nTel.: (450) 444-3600<\/a> x312 | M. (514) 865-5763<\/a>
\nluc.pouliot@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div>\u00c9RIC IRISSOU<\/strong>, Ph.D.
\nTeam Leader, Thermal Spray
\nNational Research Council Canada
\nTel.: (438) 992-8903<\/a>
\neric.irissou@nrc-cnrc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div><\/a>FERNANDA CAIO<\/b><\/a>, Eng. M.Sc.
\nOperations Manager \u2013 PolyCSAM
\nPolycontrols Technologies Inc.
\nTel.: (438) 398-4758<\/a>
\nfernanda.caio@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div>MANUEL MARTIN<\/strong>, Ph.D.
\nTechnical Leader-Additive Manufacturing
\nfor Mass Customization
\nNational Research Council Canada
\nTel.: (450) 641-5356<\/a>
\nmanuel.martin@nrc-crnc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div><\/a>SYLVAIN DESAULNIERS<\/strong><\/a>, Eng., MBA
\n<\/span>President & CFO | Co-Owner
\nPolycontrols Technologies Inc.
\nTel.: (450) 444-3600<\/a> x301\u00a0 <\/span>|\u00a0 <\/span>M. (514) 895-4461<\/a>
\nsylvain.desaulniers@polycontrols.com<\/a><\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div>JORG-OBERSTRE-BERGHAUS<\/b>, Ph.D.
\n<\/span>Senior Research Officer & Technical Leader
\nNational Research Council Canada
\nTel.: (514) 794-5893<\/a>
\nJorg.oberste-berghaus@nrc-cnrc.gc.ca<\/a><\/span><\/p>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>CSAM Process Advantages<\/h3><\/h3><\/div>
\nThe Cold Spray Additive Manufacturing process has several advantages over other 3D printing techniques:<\/p>\n
- \n
- No part size restrictions<\/li>\n
- No HAZ (Heat Affected Zone), so no damage to substrate or part<\/li>\n
- Multi-materials capability<\/li>\n
- Can be fully robotized<\/li>\n
- Batch production: from rapid prototyping to cost-effective manufacturing.<\/li>\n
- High deposit rate (several kg\/h)<\/li>\n
- Build on existing parts<\/li>\n
- Customization of components produced by traditional\/Mass production methods<\/li>\n
- Easily combined with conventional techniques such as machining & forging<\/li>\n
- Promoting a circular economy thanks to a Sustainable Process<\/li>\n<\/ul>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div><\/div>
Several Available Materials<\/h3><\/h3><\/div>
\n\n \nAt PolyCSAM, we currently spray the following materials:<\/p>\n
- \n
- Al & alloys<\/li>\n
- Ti & alloys<\/li>\n
- Cu & alloys<\/li>\n
- Ni<\/span><\/li>\n
- Carbon steel<\/li>\n
- Tools steel<\/li>\n
- Stainless steel<\/li>\n<\/ul>\n<\/div>\n<\/section>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div>
![\"\"](\"https:\/\/polycontrols.com\/wp-content\/uploads\/2020\/10\/400-002.jpg\" "\\"PolyCSAM")
<\/div><\/a><\/div><\/div>![\"PolyCSAM](\"https:\/\/polycontrols.com\/wp-content\/uploads\/2020\/10\/400-Salle-de-controle.jpg\" "\\"PolyCSAM")
<\/div><\/a><\/div><\/div>![\"PolyCSAM](\"https:\/\/polycontrols.com\/wp-content\/uploads\/2020\/10\/400-Salle-de-Projection-PolyCSAM.jpg\" "\\"PolyCSAM")
<\/div><\/a><\/div><\/div><\/div><\/div>